Removing Wire

[Alwayslearningelec]

If there is a 200' run from gear to equipment and they want you to intercept the run at the 150' point(remainder of 50' run being demolished)and reroute the wire down to new equipment how would you pull put that 50' of wire so you can reroute if there's no pull box? We would have to put a pull box to install new conduit drops to the new equipment but before that point we need to pull out the 50' of wire. It's #500's.

 

[infinity]

Cut the pipe with a Sawzall or a bandsaw and pull out the conductors.

 

[Alwayslearningelec]

Cut the pipe with a Sawzall or a bandsaw and pull out the conductors.

But don't you need space in the conduits to pull them out

 

[infinity]

But don't you need space in the conduits to pull them out

You're pulling out the conductors between the cut and the other end at the old equipment no?