#10 and #12 THHN in 3/4" EMT

[Ryanm0085]

I am running a washer and a dryer outlet. There is existing 3/4" EMT above that runs from the panel to an exit light. I plan on putting a "T" and coming out with 3/4" EMT and then down with a 90 to where I need to be. The exit light is ran with 12awg wire. My question is will it be okay to run 4-#10's(blk,red,wht,grn) and 2-#12's(blk, wht. Sharing the ground from the exit circuit) in the same conduit? When said and done, it will have 4-#10'2 and 5-#12's.

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.