100 amp pullout

Status
Not open for further replies.

bobbymari

Senior Member
Location
los angeles ca
anyone familiar with a 100 amp pullout by boltswitch part # ptl323 . my question is this. its a 100 amp 3 phase pullout specs call for class t fuses. if its pulls out where do class t fuses bolt to? the disco its self. i have 2 dead legs and the one thats still hot of course is the phase with building computer system so before pulling this thing i want to make sure i have right fuses in hand . class t bolt on fuses
 
If you google it, there is a pretty good pdf of what it looks like. link: http://www.boltswitch.com/pdf/130.pdf

And yes, the class T fuses would no doubt bolt to the pull out cartridge. But if you have the replacement fuse(s) in hand, it makes no difference - they bolt in wherever they bolt in... and you'll know as soon as you pull it.
 
Milbank uses those for their meter mains. I just replaced one today. Cost $90 for the pull out that was missing. The fuses are bolted to the pull out.
 
Status
Not open for further replies.
Top