12/2 luminaire dimming wire

[Fordean]

1st time trying this
12/2 with dimming wires within MC jacket passed experience with fixtures Having feed in out and feed in fixture Enclosure has mininmal space Probably evading the code spacing spare inch per conductor Also Low voltage And line voltage spacer Any input Thinking about screwing 1900 boxes to housing what u think?

 

[letgomywago]

1st time trying this
12/2 with dimming wires within MC jacket passed experience with fixtures Having feed in out and feed in fixture Enclosure has mininmal space Probably evading the code spacing spare inch per conductor Also Low voltage And line voltage spacer Any input Thinking about screwing 1900 boxes to housing what u think?

I've seen it done. It's not 100% legit if not integral to the fixture. They make stranded mc as an option and they also make levernuts if you want to use those on the 12 2 side and then like little blues or oranges for the dimming and it'll fit.

 

[infinity]

What kind of fixtures are these?

 

[Fordean]

What kind of fixtures are these?

2x2 flat panel led

 

[Fordean]

I've seen it done. It's not 100% legit if not integral to the fixture. They make stranded mc as an option and they also make levernuts if you want to use those on the 12 2 side and then like little blues or oranges for the dimming and it'll fit.

Seems almost legit Its still AC voltage

 

[letgomywago]

Seems almost legit Its still AC voltage

New to the 2020 code any non integral box must not be only accessible by removing fixture so if Tbar you might be ok. The other issue is the tbar fixture is listed to be supported where it is but the listing doesn't cover the addition of a 4 square even though it's negligible.