208V 3P Equipment on 240V 3P Delta

[RV6]

Hello Everyone,

We are in a facility equipped with 240V 3P Delta power. I am purchasing industrial ultrasonic cleaner that runs off 208V 3P. I am worried about damaging the machine if I connect it 240V 3P. Is there a transformer or something that can I use to interface this machine with my existing power?

The machine can possibly run off 208V single phase. It shows single phase on the nameplate. However it is not mentioned on the documentation.

Thanks!

 

[roger]

You should contact a local EC to help you with this, they will be able to address your concerns.

Roger

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

If you feel this action to be in error, feel free to contact me via PM to explain.eminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.