240v EVCS fed from 208v power panel?

[tybkeith]

ChargePoint’s electrical vehicle charging station CT4021 lists 240v output voltage but does not list the required input voltage. Can we feed this EVCS from a 120/208v power panel?
FYI… there are actually (6) six of them planned for a middle school in Los Angeles.
Thanks!

 

[augie47]

Their spec sheet seems to indicate it will operate on 208v.

https://www.chargepoint.com/files/Make-Ready-Requirements-Specification.pdf

They also have a contcat number for you to get confirmation.

 

[tybkeith]

Their spec sheet seems to indicate it will operate on 208v.

https://www.chargepoint.com/files/Make-Ready-Requirements-Specification.pdf

They also have a contcat number for you to get confirmation.

Thank you for the quick and very helpful reply!
I didn’t call the contact number but I did try asking the question on their webpage but the “bot“ didn’t recognize the question. We directed the Contractor to confirm… but your reply pointing us to the Make-Ready section is great.

 

[brantmacga]

Thank you for the quick and very helpful reply!
I didn’t call the contact number but I did try asking the question on their webpage but the “bot“ didn’t recognize the question. We directed the Contractor to confirm… but your reply pointing us to the Make-Ready section is great.

Look at page 8 in that manual.


Sent from my iPhone using Tapatalk