24v disconnecting means

[LincHawk]

I’m spoke to a customer about installing a 480v-24v transformer in a MCC bucket and then running a feed from the bucket out to an enclosure to then branch off to some terminal blocks with fuses inside for each motor. The motors are 24v 4A motors.

Do I need a disconnect on the main feed from the bucket to the enclosure?


Sent from my iPhone using Tapatalk

 

[ptonsparky]

Treat it as you would any other feeder. You need a disconnect, fusing to protect the Transformer as well as the load side conductors. Then disconnect and fusing at the tap for each motor.

 

[LincHawk]

Treat it as you would any other feeder. You need a disconnect, fusing to protect the Transformer as well as the load side conductors. Then disconnect and fusing at the tap for each motor.

That’s what I assumed. Thanks


Sent from my iPhone using Tapatalk