277V 2-WIRE PANEL

S

SGTARMY

Member
Location
LA
Occupation
Electrical
Do does any manufacture provide such panel? Or can I use a 1 phase panel 3 wire and just just a single phase and mark off the second panel.
 
Welcome to the forum.

Are looking for one line and the neutral, or two lines and the neutral?
 
LarryFine said:
Welcome to the forum.

Are looking for one line and the neutral, or two lines and the neutral?
Click to expand...
The title says 2-wire the OP says 3-wire? :unsure:
3-wire would be 480 unless they're counting the EGC.
 
Last edited:
sorry 2-wire one hot and one neutral. I have an inverter that’s that is only has a 277V output.
 
It’s a sizable inverter, has around 12 circuits. The output feed was suppose to be 480/277 trying to see what options there is.
 
SGTARMY said:
It’s a sizable inverter, has around 12 circuits. The output feed was suppose to be 480/277 trying to see what options there is.
Click to expand...
I didn't realize you had multiple circuits. I understand a lot of this, but have little experience.

Do you mean multiple DC or AC circuits? I doubt they all can or should be on one phase.

It sounds like a typical 3ph 480Y/277v feeder and panel might be appropriate.
 
You must log in or register to reply here.
Top