Ok, I am new to three phase so bare with me. I have delta three phase w/ 208 high leg. I have a 60 amp disconnect. The question is can the power run the way it is curently arranged. Here goes L1 to N is 120, L2 to N is 120, L3 to N is 208. L1 to L2 is 240, L2 to L3 is 240, L3 to L1 is 240.
L1 and L2 and N go to single phase main lug panel running 6 15 amp 120 SP circuits. L2 and L3 and N go to main lug single phase 2 space panel where a 60 amp DP breaker is feeding a 2nd main lug panel with 6 15 amp SP circuits. The power is off and this was the way the property was when I bought it. I think it will work but I am not turning on the power until I know for sure. HELP
L1 and L2 and N go to single phase main lug panel running 6 15 amp 120 SP circuits. L2 and L3 and N go to main lug single phase 2 space panel where a 60 amp DP breaker is feeding a 2nd main lug panel with 6 15 amp SP circuits. The power is off and this was the way the property was when I bought it. I think it will work but I am not turning on the power until I know for sure. HELP