3 pole lighting contactor

[Martin22]

Good Morning, yesterday I came across a square D lighting contactor that states its a 3pole contactor but it has 4 terminals. Lighting is 220v the coil on the contactor is 120v. Any help is appreciated thank you

 

[Martin22]

 

[texie]

I don't where the label indicates the number of poles. It just shows the ratings for the various ways the poles can be used.

 

[Martin22]

By the info I provided would you say its a 4 pole?

 

[Martin22]

I am trying to find some thing compatible

Square D 8903LO40V03 Lighting Contactor

8903LO40V03 - Square D Lighting Contactor Schneider Electric / Square D Lighting Contactor Its Compact And Easy to Install Standard Nema Construction Four pole and Electrically held with Screw Clamp Lighting Contactor. Lighting Contactor has "220 V At 50 Hz 240 V At 60 Hz" coil voltage rating...

superbreakers.com

 

[HEYDOG]

I am trying to find some thing compatible

Square D 8903LO40V03 Lighting Contactor

8903LO40V03 - Square D Lighting Contactor Schneider Electric / Square D Lighting Contactor Its Compact And Easy to Install Standard Nema Construction Four pole and Electrically held with Screw Clamp Lighting Contactor. Lighting Contactor has "220 V At 50 Hz 240 V At 60 Hz" coil voltage rating...

superbreakers.com

Look on Platt Electrical Supply!

 

[infinity]

Here's a 4 pole, 120 volt coil in enclosure:

8903LG40V02 - Contactor, Type L, multipole lighting, electrically held, 30A, 4 pole, 600V, 110/120VAC 50/60Hz coil, NEMA 1 | Schneider Electric USA

Schneider Electric USA. 8903LG40V02 - Contactor, Type L, multipole lighting, electrically held, 30A, 4 pole, 600V, 110/120VAC 50/60Hz coil, NEMA 1.

www.se.com

 

[Martin22]

We have an account at the company I sent the link from. It looks like off the ratings they are the same

 

[infinity]

We have an account at the company I sent the link from. It looks like off the ratings they are the same

Any 4-pole contactor with a 120 volt coil will work. If you get the exact same one that's even better because the mounting holes might even line up.