Tommy Hobbs
Member
I removed a quantity of 8-2X4 4 lamp (T12) 120V lay in fixtures and installed
8 new fixtures with electronic ballasts & 32T8 lamps, 1-4 lamp ballast per fixture, 4 lamps per fixture, my problem is turn switch on everything is fine, turn switch off & then after 2 > 3 seconds all fixtures flash real bright then go off and stay off until switch turned back on, then starts all over again, anyone know anything about this. Appreciate your help
8 new fixtures with electronic ballasts & 32T8 lamps, 1-4 lamp ballast per fixture, 4 lamps per fixture, my problem is turn switch on everything is fine, turn switch off & then after 2 > 3 seconds all fixtures flash real bright then go off and stay off until switch turned back on, then starts all over again, anyone know anything about this. Appreciate your help