ROI
New member
- Location
- Grand Rapids Michigan
I am no english major and I have read coments as far back as 1979. 358.26
"There shall not be more than the equivalant of four quarter bends (360 degrees total) between pull points"
"There shall not be more than the equivalant of four quarter bends (360 degrees total) between pull points"
- If it was leagal to put 1 - 360 degrees of bend in a single bend, the code would say 360 degrees total, and end.
- Four quarter bends translates to mean not more than 90 degrees in a single bend (90 = 1/4 of 360).
- Any bend beyond 90 degrees, while sometimes impressive, is illegal.