4 point crimp tool

[haleyjo1]

This same cat said we must use a 4 point crimp tool to put on buccanon wire connectors to our grounds any thoughts.

 

[JohnJ0906]

What do the instructions say?

 

[JohnJ0906]

Where are you located? There might be some guys here from your area familiar with the local amendments/quirks.

 

[haleyjo1]

I dont know.

 

[JohnJ0906]

I dont know.

I think some of these crimps do require that a certain tool be used.

I don't use them myself, so I can't say for sure.

 

[haleyjo1]

Richmond,Kentucky

 

[mdshunk]

This same cat said we must use a 4 point crimp tool to put on buccanon wire connectors to our grounds any thoughts.

Yeah, my thoughts are that you should show him right on the box where it lists alternate crimping tools other than the PressSure tool.

 

[haleyjo1]

I will look on the instructions and see.

 

[JohnJ0906]

That's too funny Marc, I was hoping you would see this thread, because I knew you had a picture of the instructions!

 

[jamesguy10]

All of Marcs posts either involve a list, a random picture, or a meggar

 

[480sparky]

That's too funny Marc, I was hoping you would see this thread, because I knew you had a picture of the instructions!

But he don't have one of da tool!;

 

[mdshunk]

But he don't have one of da tool!;

Hey, I've got a picture for all occasions:

Pictured is the Buchannan tool with both sizes of Buchannan copper crimp sleeves, and the Ideal tool, with both sizes of Ideal zinc chromated steel crimp sleeves.