chris kennedy
Senior Member
- Location
- Miami Fla.
- Occupation
- 60 yr old tool twisting electrician
Any one have a picture or link to these things?
Sorry 08 NEC
Sorry 08 NEC
Last edited:
406.11
- Thread starter chris kennedy
- Start date
- Status
- Location
- Windsor, CO NEC: 2017
- Occupation
- Hospital Master Electrician
- Location
- Massachusetts
Here is some info on the only ones I have used.
www.hubbell-wiring.com/library/pressreleases/h4486.pdf -
But I doubt folks will be using these in dwelling units, I think they are about $20.00 each.
www.hubbell-wiring.com/library/pressreleases/h4486.pdf -
But I doubt folks will be using these in dwelling units, I think they are about $20.00 each.
chris kennedy
Senior Member
- Location
- Miami Fla.
- Occupation
- 60 yr old tool twisting electrician
Thank you gentlemen. Thats not what I had pictured. Seems the AHJ will have you guys pulling these out of the wall on final. I see no way to identify the decora in georges link from the outside.
cadpoint
Senior Member
- Location
- Durham, NC
- Occupation
- Electrician - but not by NC Law.
don't know, Till in sight.
don't know, Till in sight.
Why, I see the Big "TR" on the older style recepticle and Leviton and other use alot to the Trim edge and yolk with qualify the device with verbage.
One might not see it, on the Leviton there's a piece of plastic just inside the slit for each CC pole.
don't know, Till in sight.
chris kennedy said:
Why, I see the Big "TR" on the older style recepticle and Leviton and other use alot to the Trim edge and yolk with qualify the device with verbage.
One might not see it, on the Leviton there's a piece of plastic just inside the slit for each CC pole.
- Status