800A CT meter enclosure suggestions

Status
Not open for further replies.
T

tom08588

Member
Location
Florida
Occupation
Engineer
I have a Solar PV project with Los Angeles Department of Water and Power and I need to source a meter cabinet enclosure for their solar production meter. They recommended an Eaton B-line 122015, but for the life of me I cannot find one and lead times are 12+ weeks (like everywhere else). They suggested I could use any brand and model so long as it meets their requirements but couldn't offer any suggestions.

Are there any other popular meter enclosure manufacturers for a 3-phase 800A service?
 
Have you checked if there's a separate meter socket and CT enclosure that would have a better availability than a combo?
 
synchro said:
Have you checked if there's a separate meter socket and CT enclosure that would have a better availability than a combo?
Click to expand...
Yeah I didn't realize that number the OP gave was an all in one or transocket. I have never used them. I usually use like a 6067 mounting base, bline121423 socket and like a bline 484811 RTCT cabinet. Not sure if the op can use or would have any luck with availability of those....
 
Try E-Box. I needed a custom utility enclosure a few weeks ago and they turned it around in 10 days.


Sent from my iPhone using Tapatalk
 
Look into Saginaw Controls and Engineering. Their standard boxes are basically an upgraded Hoffman, They also make anything custom on a fully automated CNC production line. All domestic. Only supply chain issue I run into is demand is high.
 
Status
Not open for further replies.
Top