DougR
Member
- Location
- Guadalajara, mx.
This is my first post to this site - please bear with me if I screw up. I have a winch style material lift which has a handheld control switch for up/down control. I wish to add more extensive control to this unit, namely additional control stations. This unit is single phase and I am reasonably confident it is common cap start. I believe I can just parallel another control into the existing control's termination point. No past experience with this. Guidance would be most helpful. The control is currently a momentary switch for up/down but I will want to change it to maintained contact with limit switch control at each station. HELP!!!!!!!
regards, DougR
regards, DougR