Fred B
Senior Member
- Location
- Upstate, NY
- Occupation
- Electrician
Existing installation:
Old large stone house about 4000sqft. New replacement windows high efficiency type. Stone walls approx. 3ft thick. Current electrical installation 200A 30 space full boat w/solar panels installation on back-feed breaker. Old mammoth oil furnace way outside of life expectancy, no zoning controls, and HO claims the service techs can't get parts anymore, and to straight up replace HO didn't like the price. HVAC company claims to get the needed btu he would now need two units to replace the old one.
Here is where I was called in.
HO wanted to put in electric baseboard. Preliminary calculations based from room sizes and ceiling heights come to 45.6kW needed for heating with baseboard. Definitely would seem need to upgrade and increase the size of the service as existing service load calc come out to 158A on existing 200A panel/service.
HO also considering Electric furnace as a replacement of existing ducted furnace.
Anyone with any experience with these?
Not sure if would use the same wattage calculation that was for the baseboard in sizing the electric furnace, or efficiency vs baseboard.
HO not wanting to consider mini-split.
Old large stone house about 4000sqft. New replacement windows high efficiency type. Stone walls approx. 3ft thick. Current electrical installation 200A 30 space full boat w/solar panels installation on back-feed breaker. Old mammoth oil furnace way outside of life expectancy, no zoning controls, and HO claims the service techs can't get parts anymore, and to straight up replace HO didn't like the price. HVAC company claims to get the needed btu he would now need two units to replace the old one.
Here is where I was called in.
HO wanted to put in electric baseboard. Preliminary calculations based from room sizes and ceiling heights come to 45.6kW needed for heating with baseboard. Definitely would seem need to upgrade and increase the size of the service as existing service load calc come out to 158A on existing 200A panel/service.
HO also considering Electric furnace as a replacement of existing ducted furnace.
Anyone with any experience with these?
Not sure if would use the same wattage calculation that was for the baseboard in sizing the electric furnace, or efficiency vs baseboard.
HO not wanting to consider mini-split.