electricalist
Senior Member
- Location
- dallas tx
yesterday we were checking ex fans in a large warehouse 40 ft to the deck where the fans are.
480 v 3 phase 20 amp breaker feeding each .
switch to starter, to motor...turned each on,,,nothing,,,amp probe says about 6 after in rush.
If the belts are off the fans will that affect amps?
480 v 3 phase 20 amp breaker feeding each .
switch to starter, to motor...turned each on,,,nothing,,,amp probe says about 6 after in rush.
If the belts are off the fans will that affect amps?