Arc Fault breakers not available for my load center, substitutions?

[E_Sigman]

The arc-fault breakers for my Square-D Homeline 200 amp panel are not available anymore due to the factory shutting down from COVID-19 and employee strikes. All of my branch circuits are already installed with standard 15 or 20 amp circuit breakers in the panel. Will I be code compliant if I install a single gang box per circuit with a Leviton AGRBF-W in each branch circuit? This is a stand-alone arc-fault device without a receptacle. If so I plan to install a bank of single gang boxes next to the panel, pull back the wires from the panel to the new boxes, and install new branch feeds from the panel.
This will make the arc fault device easily accessible and protect all of the circuits as well.

 

[petersonra]

the home depot web site lists them in stock.

 

[Little Bill]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.