Article 250.20 B(1)- Systems not required to be grounded?

[gmsoucy]

Article 250.20 B(1)

States if the voltage of phase to ground exceeds 150v, - grounding not required?

 

[SEO]

Section 250.20 (B) states that the systems shall be grounded under the following conditions: You can read (1), (2), and (3).

 

[gmsoucy]

Doesn't that mean that if I am not in one of those situations that grounding is NOT required?

 

[raider1]

Doesn't that mean that if I am not in one of those situations that grounding is NOT required?

Correct.

Chris

 

[acrwc10]

Your not in one of those situations if this is the same system you were talking about in your other thread ( http://forums.mikeholt.com/showthread.php?t=107872&page=3 )
Not grounding a system is more uncommon then you may think, most electricians will never see a "properly installed" ungrounded system over 150v to ground in there career.

Let me re-phrase the beginning of this " you are in a situation where you need to ground the system almost always"