Fordean
Senior Member
- Location
- New Jersey
- Occupation
- Electrical Contractor
Curious on Continous loading of a 400 amp 3 phase 480/277v ATS switch ASCO type. What would be it max limitations at Continous loading.
ATS Loading @ 480 volt
- Thread starter Fordean
- Start date
- Status
See if your question is answered on this linked page...
http://www.dieselserviceandsupply.com/Automatic_Transfer_Switch_Selection_For_Diesel_Generators.aspx
Fordean
Senior Member
- Location
- New Jersey
- Occupation
- Electrical Contractor
ATS loads
ATS loads
Thanks very helpful Great link. Cannot determine the complete loads types on this per it age. I know Im pulling 230 amps. per phase. With spikes to 260. The addtional loads Im trying to add is general Lighting and recepts. Printers. Etc. These are inductive loads. Which is another issue.. I am presuming 110 amps.
THanks for response. Happy New Year.
ATS loads
Thanks very helpful Great link. Cannot determine the complete loads types on this per it age. I know Im pulling 230 amps. per phase. With spikes to 260. The addtional loads Im trying to add is general Lighting and recepts. Printers. Etc. These are inductive loads. Which is another issue.. I am presuming 110 amps.
THanks for response. Happy New Year.
- Status