Hendrix
Senior Member
- Location
- New England
A 200a service rated auto trans switch was installed in a residence.
The existing service is 150 amps. The EC left the old riser and meter socket and changed the service cable from the meter socket to the transfer switch to 4/0. My feeling is that he should change the socket and riser to meet the code for the new 200a service. Anyone else feel this way?
The existing service is 150 amps. The EC left the old riser and meter socket and changed the service cable from the meter socket to the transfer switch to 4/0. My feeling is that he should change the socket and riser to meet the code for the new 200a service. Anyone else feel this way?