Bond Commercial Kitchen Stainless Steel wall?

[acdcmontana]

Thanks in advance. (3) part question:

1. Do I need to show a separate Bond Commercial Kitchen Stainless Steel wall? I am showing metal boxes and metal faceplates on and within the SS wall.
2. Largest load in this vicinity is 50 amp 2-pole; #10 Ga CU bond size correct?
3. What would be an appropriate method of terminating a permanent bond wire to the SS?

 

[dnem]

Thanks in advance. (3) part question:

1. Do I need to show a separate Bond Commercial Kitchen Stainless Steel wall? I am showing metal boxes and metal faceplates on and within the SS wall.
2. Largest load in this vicinity is 50 amp 2-pole; #10 Ga CU bond size correct?
3. What would be an appropriate method of terminating a permanent bond wire to the SS?

If there was a pool or spa involved, I would say that 680.26(B)(5) or 680.43(D)(4) says yes. . But as long as they don't put a pool in the kitchen 250.104 only applies to piping and structural steel.

David

 

[dcspector]

Metal face plate, metal 6/32's and self grounding device. I just guessed? I did not think about pools. that is funny.