Bond Metallic Liquid Tight?

[Jerseydaze]

Here is my situation 1"PVC going to hot tub I will need to convert to flex once in tub my plan is to use a 1"fta 3' of metallic liquid tight and i will put a bonding bushing on the end due to the pool panel being plastic. Does anyone see any problems with this. I would use non metallic liquid tight but I can only buy it by the 100 ft.

 

[Dennis Alwon]

sounds fine but I would go to the Depot and see if they sell Carflex by the foot.

 

[satcom]

That is a stock item for the truck at $29 a 100 after you mark-up your material for the job it pays to buy the roll, i can see a handyman or homeowner picking up a short piece, but for a contractor, take advantage of the roll price.

 

[jmellc]

All the supply houses around here sell Carlon or Sealtight by the foot.

 

[LarryFine]

sounds fine but I would go to the Depot and see if they sell Carflex by the foot.

Lowe's does, but I personally agree with the roll-at-a-time guys.