Box Fill for Recessed Lighting

Status
Not open for further replies.

minstek

New User
Location
Florida
Occupation
Not An Electrician
Looking at Halo HLB6099FS1EMWR lights. Box says it is rated for 8 14AWG conductors but is only 10 cu in. This does not seem to agree with box fill rules.

See product image of box https://www.lightingsupply.com/halo-hlb6099fs1emwr.aspx

Specifically trying to determine if I can daisy chain these with 14/3 which ultimately ends at a fan.

With 14/3 in and 14/3 out of each light it would be 8 conductors. With box fill calculations 7 conductors [one ground not counted] x 2 cu in = 14 cu in, but the box is only 10.
 

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Semi-Retired Electrician
I am closing this thread, in accordance with the Forum Rules.
This site is designed for:
  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals
* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
If you feel this action to be in error, feel free to contact me via PM to explain. Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.
 
Status
Not open for further replies.
Top