Burndy y750 crimper info on use.

[codewarrior321]

Hi I just purchase a used Burndy y750 hydraulic crimper. I purchase it to use in repairing grounding conductors using burndy c taps. My question is on how to used it, I have the correct U-C dye for the Burndy YGHC2C2 which is a multi range C Tap for #6 solid to #2 stranded or any combinations in between. My guess on using the crimper is to crimp till the tool releases, is the tool auto release or I have to stop when I feel pressure is max out.
I have being to Burndy web site but know info in how to use and maintain this tool any help will be appreciated.

 

[mdshunk]

The Hypress just stops crimping. That's all there is to it.

 

[B4T]

I just bought a used Sq-D VC-6.. does it work the same way??

 

[brian john]

Pump, Pump, Pump till nothing happens, hit the release and you are done.

 

[B4T]

Thanks Brian.. I tried the web site for info and gave up

 

[iwire]

If you can get your hands on one of these I recommend it

http://www.grainger.com/Grainger/it...le Base-_-Hand Tools-_-Crimping Tools-_-1XGB1

 

[codewarrior321]

oh by the way

oh by the way

I guess that is why it has that pop up valve?

 

[codewarrior321]

Thanks for all your replies

Thanks for all your replies

Thanks for your prompt replies, That recommendation is out of my league, I always new Grainger was Extra ExpensiveI am going to have to have a surcharge for every customer that i use that crimper on,pay me or I keep up the pressure on your finger