Can anyone identify this Unistrut support part?

[Installer]

Can anyone identify this Unistrut support part?
I'm hoping to duplicate the unistrut system in the picture.
I'm trying to purchase both the square washer with the attached nut and the threaded bolt.
Sometimes its called a Saddle Washer, but I have checked multiple sources and cannot find one with a integrated nut.
I also can't find the bolt.Thank you in Advance
The threa ded bolt appears to be 3/4".

 

[infinity]

That bolt actually appears to be a cut piece of threaded rod.

 

[rambojoe]

Its just a stainless whatever length stud with a inch of thread...
Should be able to order something close to that from a nut&bolt supplier.
Kinda just looks like a 9/16" nut to me. The lack of all thread is just for strength... You still could make 'em.

 

[rambojoe]

I cant see threads but im blind.
Looks like 3/8" round stock...

 

[roger]

It's threaded rod with washers and nuts. The square nut is available from Caddy (Erico)

 

[James L]

Looks like four pieces to me...

1) Strut nut behind
2) Square washer in front
3) Threaded rod through the washer and into the strut nut
4) nut in front of washer

Plus the other nuts and washers to fasten the hanging strut

 

[infinity]

I agree square washer. A saddle washer goes over the edge of the strut. Two types of saddle washers which IMO are better for the application than a square washer.

 

[tom baker]

Did you just happen to have those fittings laying around?

 

[infinity]

Did you just happen to have those fittings laying around?

Yes, pathetic I know.

 

[synchro]

There might be a spacer tube thats placed over a threaded rod or bolt to get a consistent height.

https://www.theuniversalgroup.com/products/suspension/components/spacer-tubes.html

 

[tthh]

Here is the 1/2" version of the Flex-Strut part at Zoro...

Flex-Strut Washer, Sq, Channel Guide, 1/2" Hole FS-5004-1/2 E/G | Zoro

Order Flex-Strut Washer, Sq, Channel Guide, 1/2" Hole, FS-5004-1/2 E/G at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for an account.

www.zoro.com

 

[jim dungar]

There might be a spacer tube thats placed over a threaded rod or bolt to get a consistent height.

https://www.theuniversalgroup.com/products/suspension/components/spacer-tubes.html

And it eliminates the need for a leveling nut below the top strut.

 

[rambojoe]

There might be a spacer tube thats placed over a threaded rod or bolt to get a consistent height.

https://www.theuniversalgroup.com/products/suspension/components/spacer-tubes.html

Theres not a sleeve... you can see the dia. of the stud in the top nut.

 

[Installer]

Thanks!

 

[SceneryDriver]

There might be a spacer tube thats placed over a threaded rod or bolt to get a consistent height.

https://www.theuniversalgroup.com/products/suspension/components/spacer-tubes.html

I've done that many times with accurately cut sections of 1/2" EMT. Using my dry-cut saw really helps keep the cuts square.


SceneryDriver

 

[TwoBlocked]

Could be a contractor has NPT die heads and round stock to make his own hangers and such instead of carrying all thread. I think it used to be common in large manufacturing plants.