Centering a switch in a 2 gang box
- Thread starter ike5547
- Start date
- Status
stickboy1375
Senior Member
- Location
- Litchfield, CT
What type of wall plate did you have in mind... :roll: joking aside, the answer is no... I think Nova uses 2gang boxes check those out...
Last edited:
stickboy1375 said:
A flush 2 gang white plastic plate with a Decora style opening in the center if such a thing is available? Possibly with some sort of adapter/bracket to mount the device to the center of the box and the aforementioned wall plate to mount over it.
stickboy1375
Senior Member
- Location
- Litchfield, CT
I think your stuck with a dummy switch.... or patch the wall...
Jim W in Tampa
Senior Member
- Location
- Tampa Florida
You can buy plate cover with blank one side and switch other
Cavie
Senior Member
- Location
- SW Florida
2 gang plate= 1 dacore sw and one blank.
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
Would you settle for a metal plate?
http://www.leviton.com/OA_HTML/ibeCCtpItmDspRte.jsp?item=2579§ion=10990
http://www.leviton.com/OA_HTML/ibeCCtpItmDspRte.jsp?item=2579§ion=10990
stickboy1375
Senior Member
- Location
- Litchfield, CT
LarryFine said:
How would you install the device? I believe that plate is for Nova devices...
hardworkingstiff
Senior Member
- Location
- Wilmington, NC
stickboy1375 said:
I was wondering the same thing.
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
I don't know, but you're welcome to call and ask:stickboy1375 said:
In the US
1-800-824-3005 Mon.-Fri. 8:30AM to 7:30PM ET
- Status