Class II Division I???

[GilbeSpark]

I've got some sealtite connectors I want to be able to bury. On the box it says they're suitable for class 1 division 2, class 2 division 1, and class 2 division 3. Are these suitable for burial? Where in the code book can I find the information pertaining to these classes and divisions so I know where to find the information?

Thanks!

 

[celtic]

Where in the code book can I find the information pertaining to these classes and divisions so I know where to find the information?

Thanks!

501- 503 .... and for a real treat, check 505

 

[GilbeSpark]

Ok I read up 350 and on 350.42 it says that "Angle connectors shall not be used for concealed raceway installations." But it doesn't say anything about direct burial. But in 350.10 it says that LFMC is suitable for direct burial. Does this mean that the connectors for LFMC should also be suitable for direct burial, except angle connectors?

 

[GilbeSpark]

I read up a little on the classes and divisions but I didn't see anything about direct burial limitations.

 

[celtic]

Does this mean that the connectors for LFMC should also be suitable for direct burial, except angle connectors?

That's what it would seem :-? of course, 110.3(B) may come into play as well.

 

[William1978]

If they are approved for Direct Burial they will say Direct burial on the fitting.