cdcengineer
Senior Member
I am working on a project where they store cooking oil and used motor oil (for recycling). The architect has built a control room for what they are calling the Class IIIB combustible liquid.
From my understanding of this, the flash point is 200F, and the processing of this liquid takes place at a maximum temperature of 150F. I don't believe any special considerations for power and lighting are necessary for the control room. But I wanted to get some input from the forum since I have never dealt with classified liquids (other than gasoline dispensing).
I don;t believe the storage or processing (filtering) of this liquid would create a "classified" location in the eyes of the NEC.
Any input is greatly appreciated.
DC
From my understanding of this, the flash point is 200F, and the processing of this liquid takes place at a maximum temperature of 150F. I don't believe any special considerations for power and lighting are necessary for the control room. But I wanted to get some input from the forum since I have never dealt with classified liquids (other than gasoline dispensing).
I don;t believe the storage or processing (filtering) of this liquid would create a "classified" location in the eyes of the NEC.
Any input is greatly appreciated.
DC