Davebones
Senior Member
- Location
- North Of Tampa Fl
Installing a air compressor that is about 10 ft by 6 ft on a metal skid . The controller cabinet is 3 ft in front of a concrete block wall . I told my boss it needs 3 ft 6 " from the face of the panel to the block wall . He says no he wants it installed at 3 ft . I said I understand the code calls for 3' ft 6 " from the face of the cabinet . Its a 2 X 3 ft controller cabinet with 200 HP motor 480 volt feed . If you open the cabinet any live parts are 3 ft 7" from the block wall . Would you push the issue or leave it as it is ???