Conductor Sizing | Individual Branch Circuit

Learn the NEC with Mike Holt now!

Conductor Sizing | Individual Branch Circuit

  • Yes

    Votes: 2 40.0%

  • No

    Votes: 3 60.0%
  • Total voters
    5
Status
Not open for further replies.
After reading some more in the TYCO pdf, page 20, I see that the start up current can be greater when it is first energized, so with this info if start up is done @ 0?f then a cable that is between 250' and 305' will require a 30 amp circuit, if the system is turned on at 32?f then a cable that is between 320' and 400' is required to be on a 30 amp circuit. but all the rest still applies.;)
 
hurk27 said:
After reading some more in the TYCO pdf, page 20, I see that the start up current can be greater when it is first energized, so with this info if start up is done @ 0?f then a cable that is between 250' and 305' will require a 30 amp circuit, if the system is turned on at 32?f then a cable that is between 320' and 400' is required to be on a 30 amp circuit. but all the rest still applies.;)
Click to expand...

Wayne, Thanks for the time saving analysis. 8) rbj
 
Status
Not open for further replies.
Top