aberrys
Member
- Location
- gibson city, illinois, ford county
where can I find conduit fill tables on this forum.
conduit fill charts
- Thread starter aberrys
- Start date
- Status
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
You most likely cannot. Do you have a codebook?
aberrys
Member
- Location
- gibson city, illinois, ford county
Not with me but I already have access to the charts. I'm new to this forum and was just wondering what general electrical subjects I can find here or on Mikeholt.com website.
Buck Parrish
Senior Member
- Location
- NC & IN
You'll need the book because of the variations. Look for Conductor Fill in the index. Or Annex C
kwired
Electron manager
- Location
- NE Nebraska
- Occupation
- EC
only thing you will find here on the forum pages is anything a member may have created, copied/pasted or linked to in a post.
- Location
- Placerville, CA, USA
- Occupation
- Retired PV System Designer
And on Mike Holt's website you will find all sorts of comments by Mike on rules and interpretations along with training materials to sample and references to stories of interest to sparkies.
You will not find large excerpts of the NEC itself (or for the most part other codes) since those documents are under copyright protection.
ggunn
PE (Electrical), NABCEP certified
- Location
- Austin, TX, USA
- Occupation
- Consulting Electrical Engineer - Photovoltaic Systems
MyCleveland
Senior Member
- Location
- Cleveland, Ohio
I photocopy the major wire tables, de-rating tables, 250 tables, and the wire fill charts for the major conduit types.
Cut and paste onto an 8.5 x 11 sheet.
Take to Kinko's and have it printed on fluorescent yellow paper and laminated.
I hand them out to EC friends and use it at my desk....tired of flipping through the book and don't trust my memory.
Cut and paste onto an 8.5 x 11 sheet.
Take to Kinko's and have it printed on fluorescent yellow paper and laminated.
I hand them out to EC friends and use it at my desk....tired of flipping through the book and don't trust my memory.
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
I have the NEC on my phone and I just screen shot the important tables then store them in a folder with it's own icon right on the phone for instant access. Nice thing about using screen shots is that you can pinch and zoom. 
ggunn
PE (Electrical), NABCEP certified
- Location
- Austin, TX, USA
- Occupation
- Consulting Electrical Engineer - Photovoltaic Systems
I have the NEC on my phone and I just screen shot the important tables then store them in a folder with it's own icon right on the phone for instant access. Nice thing about using screen shots is that you can pinch and zoom.
Is there some reason why you wouldn't use an on line calculator like http://conduitfillcalculator.com? I tried some test calcs and it was correct every time, so I trust it. It's especially quick and useful when I have a mix of different conductors.
Last edited:
- Status