Shockedby277v
Senior Member
- Location
- Michigan
Does Mike Holt have material on control work?? If not, is there any suggestions on material by others?? This is something I really need to spend some time on. Thnx
Control work
- Thread starter Shockedby277v
- Start date
- Status
Pierre C Belarge
Senior Member
- Location
- Westchester County, New York
There is a ton of accessible information online and books that are available.
There are some online courses, some of them are interactive, and online stuff to download that may be of good use for you.
There are some online courses, some of them are interactive, and online stuff to download that may be of good use for you.
- Location
- Windsor, CO NEC: 2017
- Occupation
- Service Manager
You mean it's normal to study before you start playing with control wiring? Whoops... 
- Location
- Bremerton, Washington
- Occupation
- Master Electrician
The best book I have found is by American Technical Publishers on Electrical Motor Controls
http://www.go2atp.com/stores/1/Electrical_Motor_Controls_for__P261C23.cfm
This books is excellent and starts with how to document motor controls, troubleshoot etc, very little on the NEC, which has some rules on motor control.
Mike Holt has material on motor controls but it was old and out of date, he has been working on updating it but don't know status.
http://www.go2atp.com/stores/1/Electrical_Motor_Controls_for__P261C23.cfm
This books is excellent and starts with how to document motor controls, troubleshoot etc, very little on the NEC, which has some rules on motor control.
Mike Holt has material on motor controls but it was old and out of date, he has been working on updating it but don't know status.
- Status