Crossing creek with power for center pivot . . . .

[Sleeper]

Hi guys,

I am installing a center pivot for irrigation on my farm. I have a pump house on one side of a creek and the location of the pivot will be on the other side of the creek. I have to install electrical wire to feed the pivot. The water line is already in place.

The crossing is 102 feet from one side to the other.

A 6 inch steel pipe is already installed (overhead) to provide water across the creek.

My plan is to transition from the cable-in-conduit that is running underground to Alumaflex PVC jacketed MC and secure the mc to the steel pipe (at 6 foot intervals) until underground again on the other side and then back to the cable con.

My question is what product (hanger) would work well for securing the PVC jacketed MC to the steel pipe crossing the creek? ( and qualify as an approved method)

I have been searching to try to find the right product - I would like it to be inexpensive - and quick to install as I do not want to be high above the creek for any length of time.

I will include a picture for reference. Thanks.

 

[iwire]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC? Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.