Cut and cap 3/0 feeders in a gutter - re-energize

[Strathead]

Have you ever "capped off" a water supply? Well, you can "cap off" a wire with a wire nut or insulation tape as well.

I just didn't understand what was being asked. Now I get it.

 

[Seven-Delta-FortyOne]

We can. we would then need to repair the riser cables at the point that they were stripped to install the Kerney. That would require a mechanical compression butt splice and cold shrink. Not impossible but we were trying to minimize down time on the additional floors.

You could just use the shrink without the (presumably uninsulated) butt splice.

Same difference.