cutting and capping 3/0 feeders

8

82angelfan

Senior Member
Location
Hesperia, Ca
Good morning all.

Is there a product like cold shrink for capping some 10' foot tapped feeder wires? We are removing the tap wires from one panel in the system and re-feeding that panel directly. I just want to cut and cap them in their gutter. I will submit on (1) Insulated Polaris type lugs, (2) something to just cap the wires with (that's where you come in), and lastly (3) removing the split bolt from the tapped cable and compression lug splice it and cold shrink. Would like to avoid the last one.
 
I actually had one laying on my desk. I think that these are also lined with some type of silicone to make the connection waterproof when heated.

Conductor Cap.jpg
 
Thanks guys, Immediately after posting this silly question I found those heat shrink caps on google. Not sure why I was having a brain fart remembering them. Time to retire I guess. Gonna submit an RFI to use them. OSHPD/HCAI job so can't wipe our asses without a detail or approval from design team.
 
You must log in or register to reply here.
Top