Recently changed contractors and looking at the DB they are using, data cable labor looks wrong.
All cable whether single or say 3 cables together have the same labor.
So 7.4/m for all cables.
I found where we should be adding labor to the first wire labor as you add more cables.
So first cable is the 7.4, the adder for cable #2 is .25 and the third is .5.
So the pull for three cables has 7.9/m as the total labor.
Does that sound right?
Thanks,
Vic
All cable whether single or say 3 cables together have the same labor.
So 7.4/m for all cables.
I found where we should be adding labor to the first wire labor as you add more cables.
So first cable is the 7.4, the adder for cable #2 is .25 and the third is .5.
So the pull for three cables has 7.9/m as the total labor.
Does that sound right?
Thanks,
Vic