FionaZuppa
Senior Member
- Location
- AZ
- Occupation
- Part Time Electrician (semi retired, old) - EE retired.
does NEC prohibit using the poles from a dbl-pole ganged breaker as independent circuits, say one side out to some outlets, the other side to some lighting? in this example lets just say each circuit is using 14/2 wire.
Eaton says doing such and the breaker may not trip as designed.
so what happens in case of a 220v oven that uses 120v tap for light? is this use ok?
Eaton says doing such and the breaker may not trip as designed.
so what happens in case of a 220v oven that uses 120v tap for light? is this use ok?