DC to AC Formula

Status
Not open for further replies.

Mark82

New member
Is there a formula used to detirmine how much DC voltage need to convert to a specific AC voltage?

(Example: A generator is putting out XX VDC into an inverter producing XXX VAC)

or is it just a matter of adding a step-up or step-down transformer after the inverter?
 
Is there a formula used to detirmine how much DC voltage need to convert to a specific AC voltage?

(Example: A generator is putting out XX VDC into an inverter producing XXX VAC)

or is it just a matter of adding a step-up or step-down transformer after the inverter?

If it's three phase then Vdc = 1.35xVac
 
With modern electronic circuits, this is a product design engineering decision. An DC voltage can be electronically converted to any AC voltage.
 
With modern electronic circuits, this is a product design engineering decision. An DC voltage can be electronically converted to any AC voltage.
While this is true up to a point, economics is the most important factor. It is more expensive and the least efficient to go from lower voltage to a higher voltage.
 
While this is true up to a point, economics is the most important factor. It is more expensive and the least efficient to go from lower voltage to a higher voltage.

But still, lots of budget 12V DC to 120V AC units are available. So to some extent it depends on what you got and what you need.
 
Status
Not open for further replies.
Top