mstrlucky74
Senior Member
- Location
- NJ
Would and LED dimmable driver have an extra wire oppose to anon dimmable LED driver? Trying to justify labor. Thanks.
Dimmable LED Driver
- Thread starter mstrlucky74
- Start date
- Status
ptonsparky
Tom
- Occupation
- EC - retired
The few High Bay we have looked at have two extra wires for a 0-10v dimming system. Some LED dim with a "standard" wall dimmer. Standard being one suitable for dimming LEDs.
Sierrasparky
Senior Member
- Location
- USA
- Occupation
- Electrician ,contractor
Can be either. Many commercial will be 0-10
electricalist
Senior Member
- Location
- dallas tx
I think so. In the commercial lights I have worked on a purple and grey we there.
When the LED lights didnt work and were on a dimming system like a grafik which is always pulsing ,,,the drivers had only h,n,g input.
When the LED lights didnt work and were on a dimming system like a grafik which is always pulsing ,,,the drivers had only h,n,g input.
Fulthrotl
~Autocorrect is My Worst Enema.~
- Occupation
- E
most any commercial LED fixture is gonna have 0-10 volt controls on it.
there is daylight harvesting to consider in a lot of situations, and not having
0-10 means your horse isn't in the race.
ptonsparky
Tom
- Occupation
- EC - retired
Still optional for some. Last project we got prices on did not have dimming as quoted from one of the suppliers. That was extra.
- Status