Hi I am dealing with an American Dish Service commercial dish washer, model ET-AF-M. It has very simple electronics, but I cant seem to figure out what is the problem. As soon as I turn the master switch it turns on before I even press"Start" AND after it completes the wash cycle, it starts another one, and another. It keeps running full cycles until I turn off the master switch. Sometimes it stops after the end of the wash cycle but it has these urges to start. If I just tap it anywhere it starts again and keeps running. I thought that the problem was the mercury relay, replaced it, but nothing changed. There are two other components - the instant start relay and the cam timer motor. If I remove the instant start relay nothing changes - keeps doing cycle after cycle. Could it be the problem or the cam timer motor? OR something else that I cant think of.... I would appreciate any ideas.
Dishwasher keeps cycling over and over
- Thread starter Martin T
- Start date
- Status
- Location
- Tennessee NEC:2017
- Occupation
- Semi-Retired Electrician
I would suggest you contact the mfg or get an appliance tech. We are not allowed to help with projects for those not in the electrical industry. With that said, this thread is closed.
- Status