Hello. Just replacing two T8 fixtures wired from double switch. Switch has hot black wire coming in and two black wires going to lights. All neutrals are connected I’m switch box and grounded. I wired the new LED lights up as the other were wired and they won’t come on. The old light wiring had black to black white to white and a jumper in between black and white. I believe. Does this sound right?
Double switch to two lights
- Thread starter Mcobb
- Start date
- Status
- Location
- Windsor, CO NEC: 2017
- Occupation
- Hospital Master Electrician
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
button at the bottom left corner of the post.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
- Status