Earthquake protection

Status
Not open for further replies.
This is not an NEC issue, you will find the requirements and criteria in building codes such as local codes, the SBC, IBC, etc...

Check with your Building Department for your area.

Roger
 
One Code article, 410.16(C) would apply to your question, but that article doesn't mention seismic protection, just the means of support for fixtures in suspended ceilings. Electricians typically refer to the clips on grid fixtures as "earthquake clips".

IBC Chapter 16 addresses seismic protection and design methods. 1621 in my 2000 IBC.
 
Status
Not open for further replies.
Top