joeyww12000
Senior Member
- Location
- Chatsworth GA
How many of you bond your EGC to your 1900 boxes everytime you make a tap up in one? From what Ive read seems like if there is a tap to be made in the box it needs to be....
EGC to 1900 boxes
- Thread starter joeyww12000
- Start date
- Status
JohnJ0906
Senior Member
- Location
- Baltimore, MD
jumper
Senior Member
- Location
- 3 Hr 2 Min from Winged Horses
I think you have to do every time. 250.148
ptonsparky
Tom
- Occupation
- EC - retired
We do. I've seen one to many energized boxes.
- Location
- Logan, Utah
I always bond the EGC to the 1900 box where it is spliced or terminated on a device.
Chris
brian john
Senior Member
- Location
- Leesburg, VA
UMMMMMMM let me think...............EVERYTIME, why do you ask?
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
What do you see as options?
joeyww12000
Senior Member
- Location
- Chatsworth GA
I dont... I was just wondering if you guys let it slide like they do at my company........:roll:
Karl H
Senior Member
- Location
- San Diego,CA
I bond every metal box. From a 1900 (4 sq) to 36x36,etc.
Pierre C Belarge
Senior Member
- Location
- Westchester County, New York
brian john
Senior Member
- Location
- Leesburg, VA
I knew that was coming.
quogueelectric
Senior Member
- Location
- new york
Any metalic box gets a bond in my world. I usually bond the box tuck it in and use self grounding devices for finish.
Cow
Senior Member
- Location
- Eastern Oregon
- Occupation
- Electrician
Nothing to add, except I don't ground 4 squares when they're only used as a pull point. I do leave a loop in all the wires for future splicing though.:wink:
- Status