Electrical design
- Thread starter mithun46
- Start date
- Status
kingpb
Senior Member
- Location
- SE USA as far as you can go
- Occupation
- Engineer, Registered
Not sure of your existing knowledge BASE, but you may want to read/understand what's in the following document as a start.
http://www.google.com/url?sa=t&source=web&cd=1&sqi=2&ved=0CB0QFjAA&url=http%3A%2F%2Fwww.eaton.com%2Fecm%2Fidcplg%3FIdcService%3DGET_FILE%26allowInterrupt%3D1%26RevisionSelectionMethod%3DLatestReleased%26Rendition%3DPrimary%26%26dDocName%3DTB08104003E&rct=j&q=eaton%20cutler%20hammer%20power%20distribution%20system&ei=OgsrTaC3L8z_nAe997z0AQ&usg=AFQjCNENOTiDYe7CGbVhNtVvNZKGRvbpXw&cad=rja
Then go to IEEE Red Book.
http://www.google.com/url?sa=t&source=web&cd=1&sqi=2&ved=0CB0QFjAA&url=http%3A%2F%2Fwww.eaton.com%2Fecm%2Fidcplg%3FIdcService%3DGET_FILE%26allowInterrupt%3D1%26RevisionSelectionMethod%3DLatestReleased%26Rendition%3DPrimary%26%26dDocName%3DTB08104003E&rct=j&q=eaton%20cutler%20hammer%20power%20distribution%20system&ei=OgsrTaC3L8z_nAe997z0AQ&usg=AFQjCNENOTiDYe7CGbVhNtVvNZKGRvbpXw&cad=rja
Then go to IEEE Red Book.
tryinghard
Senior Member
- Location
- California
You might find "Volts" helpful
If you can still fine it..
If you can still fine it..
Industrial and Commercial Power Systems Handbook, published by McGraw Hill. My copy was published in 1995. Its a great primer and will provide the calculations required for an PE or EE to size up a design. I used mine in reverse to verify a design as specified by a PE or EE.
If you can still fine it..
Industrial and Commercial Power Systems Handbook, published by McGraw Hill. My copy was published in 1995. Its a great primer and will provide the calculations required for an PE or EE to size up a design. I used mine in reverse to verify a design as specified by a PE or EE.
- Status