• We will be performing upgrades on the forums and server over the weekend. The forums may be unavailable multiple times for up to an hour each. Thank you for your patience and understanding as we work to make the forums even better.

Electrical service configuration

J

jap

Senior Member
Occupation
Electrician
The only reason I don't think the disconnect after the meter is fused where it would turn into a feeder is because I don't see any raceways coming out of it for the grounding and bonding to take place.

This seems to be a disconnect ahead of the meter for the power company's use that may or may not be sealed by them , and, a customer side
disconnect for the service conductors for an outside emergency disconnect.

If the utility power is coming in from the bottom that is.

JAP>
 
Last edited:
captain blue beer

captain blue beer

Member
Location
mississippi gulf coast
Occupation
Electrical Contractor
can i ask a question without generating a new thread? i'm putting a service on a house 600 disconnect outside, wanting to feed 3- 200amp main breaker panels through a trough on other side of the wall. would i be within code to come off the disconnect with 3 sets of 250mcm al and feed each panel with 1 set and no other over current protection?
 
You must log in or register to reply here.
Top