I own a home in the Boston area and my basement cold water pipe, where the water line enters the house, is giving emf readings of over 100 milligauss. My electrical enters at the other side of the house about 30 feet away, and I get high readings (close to 100mg) along the basement ceiling floor from the electrical panel to water line entrance. It's a grounding issue I guess. My electrical panel is also reading over 100mg, as is the utility company's meter outside the house. My service drop connects from the pole to our house on the second floor right outside my son's bedroom, and I have readings of 10mg+ in parts of his room. Any recommendations about what I can do?
EMFs at cold water pipe
- Thread starter kevinlr
- Start date
- Status
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
I am closing this thread, in accordance with the Forum Rules.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
button at the top right corner of the post.
If you feel this action to be in error, feel free to contact me via PM to explain.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
- Status