Have a 4" conduit with heating loop pex in it and want to run 12/2 UF thru to power pump for a wood boiler. Pex is closed loop heat (water and antifreeze) and feed comes from main panel...can't find any reason not to do this if on GF breaker. Conduit is in place and buried-run is 180'.
feeder to wood boiler for pump
- Thread starter bvb
- Start date
- Status
- Location
- Bremerton, Washington
- Occupation
- Master Electrician
Re: feeder to wood boiler for pump
Are you proposing to run the UF thru the 4" conduit with the PEX?
This seems like a do-it-your self post. Your profile states designer.
If you have a copy of the NEC I would be able to give the numbeous sections that state this is a violation.
If you don't have a NEC, then you have no business doing this work.
If you do this installation, make sure your homeowners insurance company does not know about it.
What is a GF breaker?
I'm going to lock this post, if you feel you are a qualified electrican, then send me a PM.
[ January 27, 2006, 10:41 AM: Message edited by: tom baker ]
Are you proposing to run the UF thru the 4" conduit with the PEX?
This seems like a do-it-your self post. Your profile states designer.
If you have a copy of the NEC I would be able to give the numbeous sections that state this is a violation.
If you don't have a NEC, then you have no business doing this work.
If you do this installation, make sure your homeowners insurance company does not know about it.
What is a GF breaker?
I'm going to lock this post, if you feel you are a qualified electrican, then send me a PM.
[ January 27, 2006, 10:41 AM: Message edited by: tom baker ]
- Status