Finding an equivalent part for Din rail mountable multiple SSRs

Julio Chadrone

Julio Chadrone

Member
Location
OH
Occupation
Controls Engineer/Electrical Engineer
I am having difficulty finding an equivalent part for something I wanted to use. I am trying to build a panel where space is my primary concern so being able to use dinrail mountable SSRs like these would be nice, but these are out of stock and I couldn't find anything else. So I am wondering if anyone has worked with anything close to this? Or can recommend where I can look?
1737493507912.png
 
Thanks, these might be handy for later but I was looking for something that could handle around 10A load
 

Opto22 - Solid State Relays

40 years' experience in every SSR, 4,000 volts of optical isolation, all are UL recognized and most are CSA recognized. Power Series SSRs offer a wide variety of voltage (110-575 volts) and current options (3-45 amps). Printed Circuit Series SSRs mount on circuit boards and control up to 4 amps...
www.opto22.com www.opto22.com
 
Julio Chadrone said:
Thanks, I have been using the Gefrans, I was hoping for something with a smaller footprint than them since the project I have I have my client wants a lot in a very enclosed area, they need atleast 4 amps, I was getting greedy with my ask for 10 amps because I was hoping it might be something I could use for other projects
Click to expand...
Have a look at Sensata-Crydom. They have a LOT of SSRs. I'm sure one will fit your needs. Be careful with spacing requirements on SSRs - they make more heat than electromechanical relays and will fail (sometimes in very exciting ways) if they get too hot.


SceneryDriver
 
You must log in or register to reply here.
Top